FINISHING DYEING PRINTING

FINISHING DYEING PRINTING

POSNO	MAKE	TYPE	YOC	WIDTH	DETAILS
7301	AIRO DUE	AP2XVVCE	2000		1 Washing and softeningmachine, Airo Due, type AP2XVVCE, yoc 2000, 2 channels,
7858	ALBRECHT	AQUARIUS	1998	1400 mm	1 x ALBRECHT mercerizing range for tubular knitting fabric, Aquarius Cygnus WEE 1.4, yoc 1998, roll width 1400 mm.
7581	ANGLADA	TURBANG TRICOT	1989	1800 mm	1 x Anglada tumbler, year 1989, type TURBANG TRICOT COMPACT ROTOR, roller width 1800 mm.
7715	ANGLADA	COMPACT ROTOR	1989	1900 mm	1 x ANGLADA continuous tumbler, type Compact Rotor TCR, YOC 1989, ww 1900 mm, entry with impregnation padder of two cylinders roll width 1700 mm, two drying/finishing chambers with heating by Junkers gas burners
7789	ANGLADA TURBANG	TDR DUPLEX PRE	1997	2400 mm	1 x ANGLADA TURBANG openwidth cont. tumbler, type TDR Duplex Presecadora, 2 bays, 2400 mm, YOC 1997
7363	AQUATROL	WATER KALENDER	1998	1600 mm	Water calender AQUATROL ww 1600 mm- squeezing calender with controlled pressure-YOC 1998
7505	ARIOLI		1994	2,40 m	1 x Arioli Fixation Machine with YOC 1994, working width 2,40 m, thermo oil.
8056	ARIOLI	STEAMER	1986	2000mm	1 ARIOLI steam-ager year 1986, 2000mm cylinder width, content 110mts, saturized steam
7784	ARIOLI	NT/HT	1996	2400 mm	2 x ARIOLI steamer, type NT/HT, oil heated, YOC 1996, ww 1900 mm / 2200 mm, cap. 280 m / 330 m
7515	ASISA			3400 mm	1 x ASISA rolling machine for dyeing beams, roll width 3400 mm, entry with oscillating guider, hydraulic driving motion.
7514	ASISA BIANCO			3200 mm	1 x ASISA BIANCO rope opener, width 3200 mm, with two drived stretcher cylinders and oscillating guider of three rolls, automatic detwister head, exit by folder.
7545	ATYC	200 HT	1994		1 x ATYC 200 HT Overflow dyeing machine, year 1994.
7891	BABCOCK		2001	2450	squeezing mangle Babcock, Mahlo Weft Bow Straightener Type RFMC 94, pin and clip chain, 5 chambers gas
7513	BECA		1994	4100 mm	1 x BECA automatic wrapping machine, yoc 1994, longitudinal welding width 4100 mm., lateral weldinf device, and unloading conveyor belts.
8100	BENNINGER		2006	1800 mm	1 x Benninger open width washing machine with 6 x closed type drum washing chambers and a cylinder dryer at the exit
7494	BENNINGER	EXTRACTA	1992/2003	3400 mm	1 x BENNINGER continuous washing range, mod. Extracta, YOC 1992, roll width 3400 mm, composed by: Entry frame with compensator for A-frames, Bianco selvedge guid
7897	BIANACALANI	BP4XGVCE			complete in all respects
7995	BIANCALANI	BPAXGVC	2005	2400 mm	TUMBLER AIRO QUATRO, BIANCALANIYOC , 2005, type BPAXGVC, Nr of ropes 4, mat. content (m) 1200 - 2400, operat.speed (m/min) 300 - 1000,
7716	BIANCALANI	AIRO 1000	1988		1 x BIANCALANI tumbler type Airo 1000, YOC 1988, two ropes, steam heating, with Effedue dust fiber compactor
7801	BIANCALANI	AIRO 1000	1995		1 x BIANCALANI, type AIRO 1000, YOC 1995 liquid softening machine, EL 380/3/50, 2 ropes and in general complete as delivered from manufacturer including softening system, filters, aircirculation and steamheated.
7498	BIANCALANI	BP4XGVCE	2001		1 x BIANCALANI AIRO QUATTRO, mod. BP4XGVCE, yoc 2001, with four ropes, squeege cylinder, addition tank and dust fiber compactor. Heating by gas and steam.
7521	BIANCALANI	BP4XGVCE	2004		1 x BIANCALANI AIRO QUATRO, for chemical-mechanical softening of fabric, type: BP4XGVCE, year of manufacture:2004, Charge of fabric: 400 ? 1500 m (depending on w
7841	BIANCO		1995	2000 mm	1 x BIANCO slitting machine, YOC 1995, width after slitting - 2000mm, photooptic sensor, weft straightener.
7778	BIANCO		1996	2400 mm	1 x BIANCO rope opener with cutting device, with centering device and squeezer, YOC 1996, ww 2400 mm
7575	BIANCO		1994	3400 mm	1 x rewinding unit make BIANCO, year of make 1994, roller width 3400 mm.
7848	BIELLA SHRUNK	KD MINIMAT	1996	1700 mm	1 x BIELLA SHRUNK Autoclave decatizing machine, YOC 1996, ww 1700 mm, KD Minimat HQ 1040, Entry with Mahlo weftstraightener mod. RMB-1, revolver winding and unwinding device, autoclave diameter 1040 mm.
7859	BISIO	HYDROCAFIN	1990	1700 mm	1 x BISIO Hydrocafin continuous decatizing machine, YOC 1990, roll width 1900 mm, felt width 1700 mm, entry with Bianco weftstraightener.
7855	BISIO	VAPOFIX	2001	1850 mm	1 x BISIO Continuous decatizing-finishing machine, YOC 2001, type Vapofix, Entry with Corino Tramatex weftstraightener, Ceia metal detector,Weko humidifier device, finishing drum with silicone blanket width 1850 mm., exit by folder
8053	BRAZZOLI	CAMELDYEING	2003		2 x Rope DYEING machine BRAZZOLI, type CAMELDYEING, year 2003, low temperature (98ğC), accoupled, capacity 300 + 300 or 600 Kgs, 3 ropes/machine.
8054	BRAZZOLI	CAMELDYEING	2001		1 Rope DYEING machine BRAZZOLI, type CAMELDYEING, year 2001, low temperature (98ğC), capacity 400 Kgs, 4 ropes,
7351	BRUCKNER	COLORADO	1990	1800	1 Bruckner open width washing line yoc 1990 input grey washing section in full width 1800 mm delivered by KLEINEWEFERS, main washing section on rope system Colo
7348	BRUCKNER	THERMOSOL	1986	1600 mm	1 Brückner Thermosol dyeing range yoc 1986 w/w 1600 mm dyeing mangle Küsters 222-11, PRE DRYING INFRA field with electric heating, drying and curing machine
7878	BRUCKNER		1992	2000 mm	1 x BRUCKNER stenter, YOC 1992, ww 2000 mm, vertical pin chain, six chambers for drying and thermosetting heating by gas.
7874	BRUCKNER		1997	2200 mm	1 x BRUCKNER Stenter, YOC 1997, useful width 2200 mm, vertical pin chain, 8 compartments for drying and thermosetting heating by dyathermic oil.
7876	BRUCKNER		1989	2400 mm	1 x BRUCKNER Stenter, YOC 1989, ww 2400 mm, 7 chambers for drying and thermosetting, heating by 14 gas burners, vertical pin chain.
7877	BRUCKNER		1992	600-3200 mm	1 x BRUCKNER Stenter, YOC 1992, ww 600 - 3200 mm, 7 drying and thermosetting compartments oil heated (21 m long).
7709	BRUGMAN		1988	1900 mm	1 x BRUGMAN continuous kiering and bleaching range, YOC 1988, roll width 1900 mm
8094	BRÜCKNER	GALAXY 500		1991	BRÜCKNER tubular bleaching range type GALAXY 500, year 1991, 3 + 3 chambers.
7767	BRÜCKNER	HN 180	1996	1800 mm	1 x BRÜCKNER stenter, type HN 180, 9 bays, gas heated, J-box, Bianco centering device, Setex weft straightener, with padder
7989	BRÜCKNER	STENTER	2000	1800 mm	NEEDLE STENTER, BRÜCKNER,YOC 2000, type SPHT-FLOW VN 18/6, operating width (mm) 600 - 1800, operat.speed (m/min) max. 80
7371	BRÜCKNER	SPLIT-FLOW	1999	2 m	1 Stenter frame, Brückner, type Split-Flow, yoc 1999, 2 m, 11 bays, gas heated, Küsters 2 bowls padder, Corino centering device, exit centre winding device, hori
7580	BRÜCKNER		1980	2000 mm	1 x stenter frame make Brückner year 1980, roller width 2000 mm, vertical pin chain, 5 bays oil.
7713	BRÜCKNER		1989	2000 mm	1 x BRÜCKNER stenter, YOC 1989, ww 2000 mm, 10 chambers with 20 burners, entry frame J-box, Brückner padder of 2 cylinders, roll width 2000 mm, Mahlo weft straightener, RFMC 10A, 4 detector cells, YOC 2000, horizontal pin and clip chain
7529	BRÜCKNER		1984	220 cm	1 x Brückner stenter, year 1984, ww 220 cm, 7 bays, gas heated, horizontal pin chain, with Wet-Tex desizing box, 1997, Küsters padder type 222.52, s-cylinder 230
7766	BRÜCKNER	VN 220-VN 240	1996	2200 - 2400 mm	2 x BRÜCKNER stenters, type VN 220-VN 240, 6 bays, gas heated, Bianco centering device, Setex weft straightener, with padder
7194	BRÜCKNER	VN 22/6		2200 mm	1 x BRÜCKNER stenter frame, VN 22/6 classic flow, ww 2200 mm, complete working hours ca. 42500 h, unwinder BIANCO foulard, weft straightener BIANCO 6 heads
7660	BRÜCKNER		1987	2200 mm	1 x BRÜCKNER stenter, YOC 1987, 6 chambers, oil heated max. 200°C, ww 2200 mm, foulard and Mahlo, horizontal pin, machine dismantled.
7756	BRÜCKNER		1980/1996	2200 mm	1 x BRÜCKNER stenter, originally YOC 1980, 4 chambers, extended to 6 chambers in 1996, gas heated with conveyor belt, with a new reserve conveyor, Küsters foulard with automatic dosing system. 2006 Setex new temperature measuring device and Setex 848
7768	BRÜCKNER	VN 280	2000	2800 mm	1 x BRÜCKNER stenter, type VN 280, 9 bays, gas heated, Bianco centering device, Setex weft straightener, with padder
8048	BRÜCKNER		1978	3100 mm	The machine is as continuous stenter frame for textiles including washing, pre-drying, drying, fixation and finishin The stenter frame includes the following :g
7769	BRÜCKNER	VN 320	2000	3200 mm	1 x BRÜCKNER stenter, type VN 320, 9 bays, with Bicoflex dyeing padder, gas heated, Bianco centering device, Setex weft straightener
8095	BRÜCKNER		1989	3200 mm	BRÜCKNER STENTER 320 CMS ROLLER WIDTH: 340 CMS MAX. FABRIC WIDTH: 320 CMS CLIP CHAIN HORIZONTAL CHAMBERS: 8 , GAS HEAT, EDMAHLO WEFTSTRAIGTHENER YOC 2003
7425	BRÜCKNER	COLORADO	1983		1 Rope washing-bleachineg machine Brückner, type Coloradao, 10 ropes each 300 m, yoc 1983
7781	BRÜCKNER	TYPE GALAXY II	1996		1 x BRÜCKNER bleaching machine, type Galaxy II 1000, capacity 1000 kg, 5 bays, 8 squeezing cylinders, YOC 1996
7967	BRÜCKNER		1990		1x stenter Brückner year 1990 , 8 chambers, working width 180 cm, steam heated
7893	BRÜCKNER COLORADO		1986		and Ramisch Kleinewefers with 2 roll squeezing mangle make Ramisch Kleinewefers, Colorado 12 section, Ramisch Kleinewefers 2000mm roller width, 2 washer with squeezing each washer approx 20 mtr cloth contents
7802	BTM	5838/5938/5841	2002	2000 mm	1 x BTM Pad-Roll bleaching line, YOC 2002, type 5838/5938/5841, ww 2000 mm, EL 380/3/50, with integrated washing and dwelling stations for average weight of 250 - 350 gr/sqm
7364	BUSER	HYDROMAG 6	1991	1560 mm	Printing machine BUSER type HYDROMAG 6 - 12 flat printing screens / 1 rotary printing screen - length of printing table 2,24 m
7923	BUSER	HYDROMAG	1982	1600 mm	Flat printing machine, Buser, type Hydromag 4vF119.1610, YOC 1982, printing length 24 m, 10 colors
7655	CALATOR	AIRTEX	1995	300-1200 mm	1 x CALATOR AIRTEX, YOC 1995, ww 300-1200 mm, wetcalander with turning table and plaiter with 2 squeezing roller,
8024	CALATOR OVERLAPING	CREASING	1998	3000 mm	1 x CALATOR OVERLAPING AND CREASING, type DM 300PT 1500, yoc 1998, 3000 mm, input large winding, output meters rolling tubes
7970	CARU		1994	2400 mm	1 x Caru emerizing machine working width 240 cm, year 1994
7721	CAVITEC	CAVIDOT	1998	2000 mm	1 x CAVITEC hotmelt and dot resin installation (scatter), type Cavidot, YOC 1998, roll width 2200 mm., ww 2000 mm, composed by: Entry frame, foodbridge, Hotmelt coating head, Caratsch scattering device, setting zone by infrared heating sys,calender
7257	CIBITEX	VOB 16000	1990	1400 mm	1 Sanforising machine, make Cibitex, type VOB 16000, yoc 1990, ww 1400 mm, rubberbelt, felt for steaming cylinder
7950	COMET FRANYZ MÜLLER				velvet shearing line Asung AMHB 20 yoc 2004 brushing, COMET 215 CLC Polrotor yoc 1992, Franz Müller shearing PPS32 yoc 1980, COMET shearing 215 SLC yoc 1992
7777	CORGHI		1997		13 x CORGHI dyed yarn winding machines and 9 x soft winders, YOC 1997
7459	CROON & LUCKE	DF1000	1986		1 x Croon & Lucke Steamer YOC 1986, type DF1000, for hand knitting yarn, 10 belts, 1 yarn per belt, creel for cones, electrical steam max. 100°C.
7493	DORNIER		1993-1994		1 x DORNIER TUBULAR MERCERISING MACHINE year 1993/1994, entry by rotating table into mercerizing compartment with expanding device, upper and lower rollers, airs
7979	ELITEX	CHASTAVA	1974	1800 mm	FIVE-CYLINDER CALENDER, ELITEX Chrastava, CZ, 1974, type 4624.1, fabric width (mm) 1800, cylinder width (mm) 2000
7968	ELITEX		1990	2000mm	1 x stenter Elitex year 1990 , 7 chambers, working width 2 meter, steam heated
7840	FERRARO	C2E	1987	1800 mm	1 x FERRARO calender, YOC 1987, ww 1800 mm, 3 steam heated rollers (acid resistant steel), 3 pressure rollers covered with felt (6 atm.)
7971	FERRARO		1998	1800 mm	1 x open width sanforizing machine Ferraro year 1998 ,
7873	FITE	FS CARBOMATIC	1990	1900 mm	1 x FITE Singeing machine, type FS Carbomatic, YOC 1990, two burners, roll width 1900 mm.
7516	FITE		1989	3400 mm	1 x FITE Singeing and pad batch range, composed by Fite singeing machine with two burners fot both fabric faces upon cooling cylinders, yoc 1989, roll width 3500
7510	FITE				1 x FITE continuous decatizing machine, roll width 3400 mm, exit with cooling box.
7739	FLEISSNER		1977	2000 mm	1 x FLEISSNER scouring plant for wool, YOC 1977, ww 2000 mm, weighing feeder, 2 opening willows, 5 washing compartments, dryer with 8 drums, 5 squeezing rollers
7477	FLEISSNER		1998	3000 mm	1 x Fleissner Wide Width Washing Range YOC 1998, country of origin Germany, ww 3000 mm, production speed 20-40 m/min
7962	GOLLER		1994	1800mm	1 x open width washing machine Goller, year 1994, working width 180 cm, 7 washing box,with cylinder dryer Wumag 8+8 cylinders
7787	GOLLER		1986	2000 mm	1 x GOLLER open width washing machine, YOC 1986, ww 2000 mm, cylinder width 2200 mm, 9 washing chambers, 1 Unirelax, cylinder dryer with 20 cylinders, cylinder width 2000 mm, dia. 57 cm, machine running.
7531	GOLLER		2002/1972		1 x Cylinder dryer Goller with padder consisting of:Dye-beam winder / centre windeing make SUCHY YOC 2002, ww 220 cm
7517	HANSA	UNIMIX	1986		1 x HANSA INDUSTRIE MIXER foamer, type UNI MIX, yoc. 1986, production from 100 to 1000 Kg / h, entry density 700/1300 gr/l., Air flow from 2 to 98,3 Nl/min, foam
7847	HEMMER			1700 mm	1 x HEMMER Autoclave decatizing machine, ww 1700 mm, autoclave diameter 1400 mm., with Corino Tramatex weftstraightener.
8020	HENDRIKSEN	VACU 1200/3200	1997	3200	1 x HENRIKSEN VACUUM JIGGER, type VACU 1200/3200, yoc 1997, 3200 mm
8021	HENDRIKSEN	SUPER1200/3000	1998	900-3000 mm	1 x HENDRIKSEN JIGGER, type SUPER 1200/3000, yoc 1998, 900-3000 mm
7852	ICOMATEX		2005	3200 mm	1 x ICOMATEX Coating machine, YOC 2005, roll width 3400 mm, ww 3200 mm, to work upon cylinder or at air.Gravimat equipment. Yoc 2005.
7851	ISOTEX		2003	2400 mm	1 x ISOTEX Coating installation, YOC 2003, ww 2400 mm.
7869	J.ZIMMER	R 92 - S/40	1992	2000 mm	1 x J.ZIMMER Rotary printing machine, type R 92 - S/40, YOC 1992, printing width 2000 mm., six colours.
7533	KANNEGIESSER		2000	2000 mm	1 x Kannegiesser Garment & Textile Technologies lamination unit, YOC 2000, ww 2000 mm, consisting of:2 x big batch off winders, 1 x small batch off
8055	KD BIELLA SHRUNK	MINIMAT HQ1040			1 KD BIELLA SHRUNK PROCESS type MINIMAT HQ 1040, yoc 1991, autoclave inox diam 1000 mm 2 cylinders inox diam.440 mm , delivery small roll without folding
7991	KLEINEWEFERS	NIPCO-L	2002	1800 mm	CALENDER NIPCO-L RKK 3 CYLINDER, KKA KLEINEWEFERS,YOC 2002, fabric width (mm) 700 - 1800, cylinder width (mm) 2000 - 2150,
7763	KLEINEWEFERS		1996	1800 mm	1 x KLEINEWEFERS pad batch dyeing machine, exit batcher, for woven fabrics, automatic dosing unit
7761	KLEINEWEFERS		1996	2600 mm	1 x KLEINEWEFERS continuous washing and bleaching machine, capacity 80.000 m/day, 7 washing chambers, steaming unit, automatic dosing system, exit batcher and plaiter
7523	KLEINEWEFERS	NIPCO-FLEX RK	1988	800-1850 mm	1 x Calender Kleinewefers, three-bowl calender type NIPCO-Flex RKK 360, YOC 1988, width of rollers 1900 mm, width of fabric 800 - 1850 mm
7360	KLEINEWEFERS	CARBOMATIC OS			1 x Singeing machine KLEINEWEFERS CARBOMATIC, type PS - fabric entry device after drawing from a palette, insertion device with two pairs of selvedge guides
7963	KLEINEWEFERS		1999		1 x open width drum washing machine Kleinewefers ,year 1999, 6 washing box working width 2 meter
7822	KRANTZ	K10-1	1990	3200 mm	1 x KRANTZ stenter, type K10-1, YOC 1990, 6 chambers, ww 3200 mm, gas heated, pin and clips chain, Küsters padder, Mahlo weft straighteners
7362	KUSTERS	KALENDER	1986	1700	1 x Four -bowl calender KÜSTERS - 2 metallic heated bowls, steam 6 bar.- 2 soft bowls cotton- ww max. 1700 mm
7895	KÜSTERS	214.40.1600	1986	1800	40 tons pressure with roller width 1800 mm, 4 rollers top roller steel chromized 290 mm diamter steam, 2nd+3rd roller cotton, lower roller sele, pressure 40 tons
7987	KÜSTERS	222.11	2000	1800	COLD DYEING PADDER, KÜSTERS, YOC 2000, type 222.11 - 1800, cylinder width (mm) 2000, operating width (mm) 900 - 1800
7558	KÜSTERS		1989	1600 mm	1 x Küsters Jigger, year 1989, working width 1600 mm, roller width 1800 mm.
7983	KÜSTERS	1800 WB	1992	1800 mm	CONTINIOUS DYEING PAD-STEAM LINE, KÜSTERS, 1992, type 1800 WB, cylinder width (mm) 2000, operat.speed (m/min) 80
7984	KÜSTERS	1800 WB	1992	1800 mm	CONTINIOUS BLEACHING LINE, KÜSTERS, 1992, type 1800 WB, cylinder width (mm) 2000, operat.speed (m/min) 100,
7421	KÜSTERS	JIGGER DIA 100	1983-1995	1800 mm	1x KÜSTERS open width washing line with 3 chambers, each 20m 5-bowls-cylinder, YOC 1983-1995, 25m squeezer and winder, ww 1800 mm
7806	KÜSTERS		1998	1800 mm	1 x KÜSTERS open width washing range, YOC 1998, ww 1800 mm, consisting of 6 washing chambers, final squeezer, 1 dryer with 10 cylinders, steam heated, plaiting and batching delivery.
7992	KÜSTERS		2002	1800 mm	CONTIONUAL WIDE WASHING LINE, KÜSTERS, 2002, operating width (mm) 800 - 1 800, cylinder width (mm) 2 000, operat.speed (m/min) 20 - 80,
7977	küsters		1995	2200 mm	COLD DYEING PADDER, KÜSTERS, 1995, type 222.52, cylinder width (mm) 2400, operating width (mm) 2200, Nr of cylinder 2.
7530	KÜSTERS	868.35	1997	260 cm	1 x Jigger Küsters type : 868.35, year 1997, cylinder width 280 cm, working width 260 cm.
7821	KÜSTERS		1998	3200 mm	1 x KÜSTERS cont.open width washing machine, 3 washing chambers, ww 3200 mm, YOC 1998.
7728	KÜSTERS	222.54-4000	1990	4000 mm	1 x KÜSTERS finishing padder, type 222.54-4000, YOC 1990, ww 4000 mm, 2 S-cylinder, in warehouse, excellent condition
7894	KÜSTERS	222.11.1600	1985		width swimming S-roll, SERA 2 pump dosing unit, type 281461600 make Küsters
7576	KÜSTERS	222.11.1800	1985		1 x cold pad batch dyeing pad mangle make KÜSTERS, year 1985, type 222.11.1800.
7720	LAFER		2001	2000 mm	1 x LAFER finishing line, roll width 2000 mm., YOC 2001, composed by:Lafer raising machine mod. GRI 224 A, Lafer raising-shearing machine, mod. GLC 136 E, Lafer raising machine, mod. GRI 36-24 E,Lafer shearing machine, mod. CMI 200
7791	LAFER	CMI-EVO PC	2002	2400 mm	1 x LAFER shearing machine for velvet, type CMI-EVO PC, 2400 mm, YOC 2002
7853	LAFER	KS/B	2000	2400 mm	1 x LAFER Compactor machine, YOC 2000, type KS/B,roll width 2400 mm., with double felt passage, ready for open width and tubular knitting fabric.
7854	LAFER	KS/B SOFT PLUS	2001	2400 mm	1 x LAFER Open width compactor machine, type KS/B Soft Plus, YOC 2001, roll width 2400 mm, 2 compacting felts . Exit by conveyor belt.
7792	LAFER	TMB-125	2002		5 x LAFER tumbler for velvet, type TMB-125, yoc 2002, 125 kg
7966	LAMPERTI			1800 mm	1 x Lamperti raising machine with 30 drums year 1997
7757	LAMPERTI	GB L 86B	1992	2200 mm	1 x LAMPERTI raising machine, 1 tambour, type GB L 86B YOC 1992, plaiter, with filter, working width 2200 mm
7422	LEMAIRE	SZV 800/1800	1996	1800 mm	1x LEMAIRE transfer printing machine, type SZV 800, ww 1800 mm, J-box YOC 1996
7723	LOOS	ULS 28.000	2007		1 x LOOS steam boiler, type ULS 28.000, YOC 2007, production of 25.000 Kg steam/h., 10 bar, 198°C, with Saacke gas burner. Pumps with frequency variator (inverter). Economizing system to entry water heating by exhaust smoke. Weight 50 Tn
7634	MAHLO	RFMC-10	2000	1800 mm	1 x MAHLO RFMC-10, YOC 2000, ww 1800 mm, 3 cylinders
7407	MAHLO	RFMC 10	2002	2400 mm	1 Mahlo weftstraightener, type RFMC 10, yoc 2002, roller width 2400 mm
7492	MAHLO	RFMC 10	2002	2400 mm	1 x MAHLO WEFT/BOW STRAIGHTENER year 2002, roller width 2400 mm, type RFMC 10 with control unit at the machine directly being independent unit.
7656	MAHLO	RFMC 10	2002	2400 mm	1 x MAHLO WEFT/BOW STRAIGHTENER, type RFMC 10, YOC 2002, ww 2400 mm, with control unit at the machine directly being independent unit
7993	MARIO CROSTA	SPT / 6	2003	1700 mm	GRINDING BRUSHING MACHINE, MARIO CROSTA, YOC 2003, type SPT / 6, fabric width (mm) 1700, cylinder width (mm) 1800.
8025	MARIO CROSTA	SSC/A	2003	1800 mm	1 x MARIO CROSTA SHEARING MACHINE, type SSC/A, yoc 2003, 1800 mm
7707	MAT	TECNOPLUS	2001	2000 mm	1 x MAT open width washing machine, type TECNOPLUS, YOC 11/ 2001, ww 2000 mm, entry J-box, Bianco centering device,1 washing chamber with squeezer 2x open washing unit Vibrocompact + squeezer, exit batcher or plaiter
7294	MAT	SUPERVELOX COM	1998		1 Rapid rope scouring and hot dry softening machine, type Supervelox Combidry, 350 kg fabric capacity, max. speed 600m/min, max. temp. 110°C, yoc 1998, supplied
7423	MATHIS	BFA-8-11990	1989		1 HT-lab dyeing machine, Mathis, type BFA-8-11990, 8 heads, yoc 1989
7965	MCS		1994	1800 mm	1 x MCS wet emerizing machine year 1994
7860	MCS	SF 100	1997		1 x MCS Jet Overflow dyeing machine, type SF 100 4S 54 HT, YOC 1997, high temperature, 4 ropes, nominal capacity 520/600 Kg,Termoelettronica CT 301 LAN program controller.
7506	MEZZERA		1996	2 m	1 x Mezzera Open Width Washing Machine, YOC 1996, 14 compartments, width 2 m.
7799	MEZZERA	VGC	2005	2000 mm	1 x MEZZERA piece dyeing machine, YOC 2005, type VGC, width 2000 mm, EL 380/3/50, sample atmospheric jigger for max content 60 meters, 6 bars.
7773	MEZZERA		1996	2400 mm	1 x MEZZERA rope washing machine, cylinder width 2,60 m, Bianco centering device, open width 2 chambers, chemical dosing unit, 13 ropes, Bianco rope opener, exit plaiter
8093	MONFORTEX	TOP TEX	2006	1800	Sanforizing Macine Year of construction: 2006, not much used Grinding machine for rubber belt Thread and stitch counter with electronic device to control the set up of shrinkage Monforts Qualitex 5000 control board with Siemens S7 control with window
7896	MONFORTS		1991	2600	weft and bow straightener make Mahlo year 1992 with 4 optic heads, levelling stenter with horizontal pin chain
7978	MONFORTS	THERMOZOL	1974	1600 mm	THERMOSOL DYEING LINE, MONFORTS, 1974, cylinder width (mm) 1800, operating width (mm) 1600,
7982	MONFORTS	MONFORTEX	1992	1800 mm	SANFORIZING MACHINE, MONFORTS, 1992, type MONFORTEX, nominal width (mm) 2000, rubber belt width(mm) 2000
7990	MONFORTS	MONFORTEX	2000	1800 mm	SANFORIZING MACHINE, MONFORTS,YOC 2000, type MONFORTEX, nominal width (mm) 2000, rubber belt width(mm) 2000
7377	MONFORTS	STENTER	1985	1800 mm	Monforts stenter 5 fields.YOC 1985 width max 1.80 m with Foulard followed by Mahlo weft straigtener.Needle/Clip chain combination
7980	MONFORTS	THERMEX	1990	1800 mm	THERMOSOL DYEING LINE, MONFORTS, type THERMEX, 1990, cylinder width (mm) 2000, operating width (mm) 1800.
7507	MONFORTS	TOPTEX	1996	2 m	1 x Monforts Sanforizing Machine, type Toptex, YOC 1996, working width 2 m, cylinder width 2,20 m.
7875	MONFORTS	MONTEX 20 G/K	1989	2000 mm	1 x MONFORTS stenter, type Montex 20 G/K, YOC 1989, combined horizontal pin and clips chain, useful width 2000 mm, 10 chambers for drying and thermosetting heating by gas burners.
7871	MONFORTS	TOP-TEX W	1988	2000 mm	1 x MONFORTS Sanforizing machine, type Top-Tex W, YOC 1988, for knitting fabric, useful width 2000 mm.
7408	MONFORTS	TOPTEX	1990	2200 mm	1 MONFORTS SANFORIZING MACHINE SUITABLE F.KNITTED/WOVEN FABRICS,MONFORTS TOPTEX W yoc.1990, roller width 2500 mm, suitable fabric width 2200 mm, feeding fm plai
7491	MONFORTS	TOPTEX W	1990	2200 mm	1 x MONFORTS SANFORIZING MACHINE SUITABLE FOR KNITTED AND WOVEN FABRICS, mainly for knits type MONFORTS TOPTEX W year of make 1990, roller width 2400 mm , suita
7793	MONFORTS	E+ A	1988	2300 mm	1 x MONFORTS thermosol dyeing machine, type E + A, YOC 1988, 2300 mm
7653	MONFORTS	DYANAIR	1996	2400 mm	1 x tensionless tumble dryer make MONFORTS type DYANAIR, YOC 1996, ww 2400 mm
7879	MONFORTS	MONTEX 8GK	1992	2400 mm	1 x MONFORTS stenter, YOC 1992, type Montex 8GK, ww 2400 mm, horizontal pin chain, five drying and thermosetting chambers with Maxon gas burners of 280 kW each.
8067	MONFORTS	MONTEX 8GK	1992	2400 mm	1 x MONFORTS stenter frame, mod. Montex - 8 GK,KUSTERS padder, mod. 75//240, yoc 1967,BIANCO - TAPALSA weftstraghtener, mod MDC 3 + 3 , yoc 1992, useful width 2400 Maxon gas burners m.,,
7872	MONFORTS	TOP-TEX W		2400 mm	1 x MONFORTS sanforizing machine, type Top-Tex W, roll width 2400 mm., composed by: Entry frame with Bianco stretcher and guider equipment,equalize steam drum, compresive shrinking unit, with cooling drum.
7469	MONFORTS		1983-1984		1 x MONFORTS SANFORIZING RANGE, YOC 1983/1984, upper roller width 1890 mm
7892	MONFORTS TYPE TOPTEX		1999	2000	Weko clip, stenter frame with a rubber blanket width of 1945, 2 tambour
7447	MONTEKS	3F TWIN AIR	1998	1800 mm	1 x Monteks 3F Twin air, YOC 1998, ww 1800 mm, needle, speeds/-50m/min, 3 chambers each 3m gas heated
7451	MORRISON/REGGIANI/CROM		1976	2000 mm	1 x Pad Steam Dyeing Machine MORRISON/REGGIANI/CROM with singing and brushing equipment for continuing operation, ww 2000 mm, YOC 1976. 1 UNROLLING SYSTEM, 1 J-SCRAY
7785	MUZZI		1996		1 x MUZZI sanforizing machine, steam heated, steaming cylinder NOMEX, YOC 1996, rubber and felt calender, dia. 2100 mm
7366	OSTHOFF	U80 / VP87/1	1982	2000	Singeing machine OSTHOFF U80 / VP87/1- complete line for brushing, singeing and desizing- working / nominal width 2000 / 2200 mm
7573	OSTHOFF	T97	1999	2200 mm	1 x OSTHOFF SINGEING MACHINE year 1999 installed in 2000, roller width 2200 mm, type T97.
7969	OSTHOFF		1994	2200 mm	1 x Singeing machine Osthoff year 1994, working width 220 cm, with Mezzera desizing unit
7410	OSTHOFF	U 80	1988-89	2700 mm	1 OSTHOFF SINGEING MACHINE TYPE U80 year of make 1988/1989, singeing and fabric width 2700 mm, comprising out of high cloth feeding frame, entry as a bow, edge u
7985	OSTHOFF	UNIVERSAL 94	1996	3200 mm	GAS SINGEING LINE, OSTHOFF, type UNIVERSAL 94, 1996, fabric width (mm) 3 200 ( or 2x 1 500), nominal width (mm) 3400
7774	OSTHOFF	VP 94/1	1996		1 x OSTHOFF singeing machine with desizing, type VP 94/1, gas heated, centering device, exit batcher, with 2 brushing units, desizing, squeezer
7708	OSTHOFF/TEPA			1800 mm	1 x OSTHOFF Singeing and Impregnation TEPA range, ww 1800 mm, roll width 2100 mm
7919	PAREX	MATHER	2005	3500	Singeing machine, Parex, type Mather 3500 mm, YOC 2005, 1 size box
7976	PROBAN RHODIA		2008	2000 mm	AMMONIA PREPARATION UNIT, PROBAN, METALL Holland, RHODIA England, 2008, op.width: 2 000 mm, op.speed.max : 40 m/min,
7609	RAMISCH		ca. 1986	2000 mm	1 x RAMISCH Calender, roll ww 2000 mm, YOC 1986, heating by thermic oil, new electrical board
7394	RAMISCH		1979	2600 mm	1 x RAMISCH KLEINEWEFERS Calender, YOC 1979, ww 2600 mm, 3 rollers Steel-Racolan-Racolan, steam heated.
7319	RAMISCH	RKK 360P-NIPCO	1989	3.000 mm	1 Embossing calender Ramisch Kleinewefers, type RKK 360P-Nipco, 1989, 3 cylinders, cylinder width 3.000 mm, pressure 60 tons, top cylinders paper, diam. 640 mm,
7359	RAMISCH KLEINEWEFERS		1974	1600	1 Ramisch Kleinewefers calender completely renewed at 1999 4 rollers steel/racolan/racolan/steel
7890	RAMISCH KLEINEWEFERS	NIPCO FLEX	1989	2000	CALANDER MACHINE MAKE RAMISCH KLEINWEFERS TYPE NIPCO FLEX year 1989, condition like just unpacked from wooden boxes because seldomly used
7762	RAMISCH KLEINEWEFERS		1996	1800 mm	1 x RAMISCH KLEINEWEFERS continuous mercerizing machine, cylinder width 2,00 m, centering device, 4 washing chambers, exit batcher and plaiter, costic heating and cooling system
7850	RAMISCH KLEINEWEFFERS		1985	2600 mm	1 x RAMISCH KLEINEWEFFERSCalender, YOC 1985, ww 2600 mm,with three rolls:Top roll steel chromed,heating by electrical resistances, middle roll in cotton, bottom roll steel chromed (without heating).
7714	REGGIANI	TERMA	2003	2000 mm	1 x REGGIANI stenter, type TERMA, 200/15 gas, YOC 2003, ww 2000 mm, 7 chambers for drying and thermosetting with 4 motors/fan in each chamber, heating by 14 Weishaupt gas burners of 200 kW each. Double cooling chamber. Mahlo weft straightener
7373	REGGIANI	AVANT	1993	2200 mm	1 x Reggiani Multi-colour flat screen printing, model AVANT, year 1993 overhoult in 2003 12 colors, printing width 220 cm,blanket width 250 cm,blanket lenght
7816	REGGIANI		2003	3800 mm	1 x REGGIANI stenter, YOC 2003, ww 3800 mm, 8 chambers, gas heated, oil-free chain with pin & clips, MAHLO weft straightener 2003, BETA foulard.
7722	ROLLMAC SABEM CARATSCH		1995-2004	1800 mm	1 x Coating and impregnation range, composed by: ROLLMAC coating head, YOC 2004, ww 2000 mm, SABEM stenter, YOC 1995, ww 2000 mm, 7 chambers by gas, CARATSCH calender, roll width 1800 mm
7511	SAMIT		1995	3400 mm	1 x SAMIT rolling machine for A-frames, yoc 1995, roll width 3600 mm., useful width 3400 mm., max. diameter of A-frame 1800 mm, composed by : platform scale, con
7770	SANTEX	SANTASHRINK	1997	2400 mm	1 x SANTEX open width knitt dryer and sanfor with chain, YOC 1997, max. fabric width 2400 mm, Santashrink with padder, 5 bays, gas heated
7771	SANTEX	SANTACOMPACT	1997		1 x compactor SANTEX, Santacompact 240, YOC 1997, with steaming unit
7795	SANTEX	SANTASPREAD 14	1996		3 x SANTEX sanforizing machines, type Santasread 140, for circular knitted fabric, YOC 1996
7426	SCHOLL	BIGSTAR CENTUR	1999		1x dyeing machine make SCHOLL, type Bigstar Century Duo BCD 14-61208-70 Ohh 6ropes, temp.140°C, year 1999, 2400 kg.
7641	SCHOLL	COLORSTAR	1994		1 x SCHOLL colorstar high temperature dyeing machine Jet 7, YOC 1994, 1 feeding and 2 tube for approx 150 kg each total 300 kg, with barco sedo control 2000 with 2700 l contents, for dyeing and bleaching of cotton, 95°
7428	SCHOLL	RMC14-10208	2001		1x dyeing machine make SCHOLL, type RMC14-10208, year 2001, 1 rope, temp. 140°C, 200 kg.
7427	SCHOLL	RMC14-20408	2001		2x dyeing machines make SCHOLL, type RMC14-20408, year 2001, each 2 ropes, temp.140°C, 400 kg.
7647	SCHOLL	SOFTGLIDER	1999		1 x Scholl Softglider high temperature dyeing machine jet 10, YOC 1999, 3 feeding and 3 tube for approx 150 kg each total 450 kg
7187	SEIREN		1990	1800 mm	1 x SEIREN brushing machine, YOC 1990, ww 1800 mm
7402	SEIREN		1990	220 cm	1 Seiren Brushing machine for Pol fabric, 1 preheating cylinder, 4 brushing cylinders, 2 cooling cylinders, heated by oil
7788	SHAOYANG		2005	3200 mm	1 x SHAOYANG stenter, YOC 2005, ww 3200 mm, cylinder width 3400 mm, gas heated, 8 chambers, pin and clip, machine running.
7994	SONIC		2004		ULTRASONIC WELDING UNIT, SONIC, 2004, type ELM 20, 2 x generator ELM 20/Gr, vibrating unit, titanium sonotrode to welding
7776	STALAM		1997	1750 mm	2 x STALAM RF dryer, YOC 1997, ww 1750 mm
7800	STENTEX	3300	2003	2000 mm	1 x STENTEX stenter, YOC 2003, type 3300, ww 2000 mm, EL 380/3/50, vertical pin chain, gas heated, with Siemens Simatic SCD 1597
7353	STORK	RD 4	1991	1620	1 Stork RD IV Rotary Printing Machine 12 Colors (11 operational) YOC 1991, Pattern repeat 640 mm drying chamber on floor with 3 sections
7918	STORK	1850-10-R+3S-3	2004-2005	1850	Rotary printing machine, Stork,type 1850-10-R+3S-3P-G, ww 1850 mm, 10 colors, Apollo dryer, steam YOC 2004-2005
7910	STORK	MBK	1997	2800	1 x Stork MBK - Embossing printing machine, YOC 1997, ww 2800 mm, 2 colors
7834	STORK		1999	3400	1 x Line for Rotary screens, YOC 1999, ww 3400 mm, stork designer scanner/plotter with terminal printer and dash board and film with tower etc
7446	STORK	CT4	1988	1700mm	1 x Stork " CT4" rotary screen coating/printing machine year 1988, working width 1700 mm, 2 heads, with equalizing squeegee, with washing machines for screens an
7779	STORK	RD-DD	1996-1997	1850 / 2400 mm	1 x ww 185 cm, RD-DD 1850/16, 16 colors, dryer 3 bays, brushing, gas heated, YOC 1996, 1 x ww 240 cm, RD-DD 2400/16-12, 12 colors, dryer 3 bays, brushing, gas heated, YOC 1997,1 x color kitchen IPS-2000, 36 colors reactive, YOC 1996
7435	STORK	MBK	1993	1850 mm	1x STORK Rotary screen printing machine, type MBK, YOC 1993, 16 colours, ww 1850 mm, double- sided, computer controlled 6 sections Stork TR-D, steam heating
7867	STORK	RD IV	1988	1850 mm	1 x STORK Rotary printing machine, type RD IV, YOC 1988, 9 colours, printing width 1850 mm, ( blanket width 2050 mm), repeat 64.
7868	STORK	RD IV	1985	1850 mm	1 x STORK Rotary printing machine, type RD IV, YOC 1985, printing width 1850 mm, blanket width 2080 mm., 9 colours.
8018	STORK	RD IV	2004-5	1850 mm	1 x STORK STENCIL PRINTING, type 1850-10-R + 3S-3P-G, yoc 2004+2005, 1850 mm, with screens and blades washingmachine, 10 screens
7857	STORK		1995	2200 mm	1 x STORK Fabric loop steamer, YOC 1995, roll width 2200 mm, fabric capacity 200 m, ready to work at low and high temperature
7780	STORK	STK	1996	2400 mm	1 x STORK LASER engraving unit, type STK, repeates 640, YOC 1996, ww 2400 mm
7880	STORK	TC 131/3500		3230 mm	1 x STORK Transfer printing machine, type TC 131/3500, roll width 3500 mm., endless felt width 3230 mm,entry with double set of E+L guiders, exit with axial rolling device.
7986	STORK BRABANT	FP II	1996		FOAM MAKING UNIT, STORK BRABANT Booxmeer, Netherland, type FP II - 300 L, 1996, tank size (litres) 300, coating knife.To the foam from polymers production, next to fabric coating with the special koating knife. On the input of the stenters.
7964	SUCKER MULLER		1994	1800	1 x Sucker Muller emerizing machine year 1994
7605	SUCKER-MULLER	SF	1988	1800 mm	1 x SUCKER-MULLER emerising machine, type SF, 1800 mm, 6 cylinder, YOC 1988, suction device
7512	TAPALSA	157	1993	1900 mm	1 x TAPALSA doubling and rolling machine type 157, yoc 1993, entry roll width 3750 mm, rolling width 1900 mm, automatic selvedge guider.
7370	TEC SUPPORT	CPM-A-R	2001	1800 mm	1 x sample printing machine make TEC SUPPORT YOC 2001, type CPM-A-RF, sample printing for rotary and fladbed printing ww 1800 mm
7849	TEDINCO		1990	2600 mm	1 x TEDINCO Calender, YOC 1990, roll width 2600 mm, three bowls: superior paper,central in chromed steel heating by dyathermic oil, inferior paper.Hydraulic pressure 50 Tn. Entry frame with pneumatic guiders, exit with batcher for A-frames
7870	TEPA		1989	1800 mm	1 x TEPA sanforizing range, YOC 1989, roll width 1800 mm, composed by Entry frame with E+L selvedge guiders, steaming chamber of 20 mts fabric capacity and exit by equalizing drum.
7846	TEPA		1994	2000 mm	1 x TEPA Alkali treatment range, YOC 1994, roll width 2000 mm, composed by: Entry frame with E+L guiders, impregantion padder with high capacity tank, two steamer compartments and washing tank with drum system. Exit by haig squeege padder and folder.
7621	THEN	HST 120/20	1994	2000 mm	1 x beam dyeing machine, type HST 120/20, YOC 1994, ww 2000 mm, 2895 l, Temp. 156° C
7623	THEN	HST 120/20	1988	2000 mm	1 x THEN beam dyeing machine, type HST 120 / 20, YOC 1988, HST 120 / 20, ww 2000 mm, temp. 140° C, 2895 l
7957	THEN	HST 120/20	1988-94	2000 mm	2 x Then HST 120/20 beam dyeing machines yoc 1988 and 1994 w/w max 2000 mm max beam siameter 1000 mm 4.5 bar, 156 tank diameter 1200mm
7956	THEN	HST 155/20	1997 1998	2000 mm	2 x Then HT beam dyeing Machine, yoc 1998 max fabrik width 2000mm, diameter 1300 mm tank dia 1550 mm, 4.5 bar, 156°C
7961	THEN	AFS-675,	!))(		1 x dyeing machine THEN airflow type AFS-675, year 1998, 675 kg cap.
7603	THEN	FILIER D1 350	2003		1 x THEN HT-Jet Dyeing machine, type FILIER D1 350, YOC 2003, 140°C, 310 liter
7602	THIES	HT	2002	1800 mm	1 x THIES HT Jigger, YOC 2002, 11278 liter, 140°C, 1800 mm
7429	THIES	ECO SOFT	1997		1 Dyeing machine, Thies, type Eco Soft, 2 channels, yoc 1997, 8193 l, 103°C
7753	THIES	ECO SOFT	1991		1 x THIES dyeing machine, type ECO SOFT HT, eco-soft 140, YOC 1991, 140°C, 3 bar, 450 kg, SEDO PC 3100 control
7579	THIES	ROTOSTREAM	2001		1 x THIES high temperature dyeing machine type ROTOSTREAM year 2001, Jet 11, Thies T737 control, 4 chambers each 180 kg total 720 kg, 39715 ltr
8062	THIES	ROTOSTREAM	1991		THIES mod. Rotostream jet/overflow dyeing machine, yoc 1991, high temperature, two ropes, capacity 240 Kg. Obsa-Jucker program controller.
8063	THIES	ROTOSTREAM	1991		THIES mod. Rotostream jet/overflow dyeing machine, yoc 1991, high temperature, one rope, nominalTHIES mod. Rotostream jet/overflow dyeing machine, yoc 1991, high temperature, one rope, nomin alcapacity 120 Kg. Obsa-Jucker program controller.
8064	THIES	ROTOSTREAM	1989		THIES mod. Rotostream jet/overflow dyeing machine, yoc 1991, high temperature, one rope, nominalcapacity 120 Kg. Obsa-Jucker program controller.
8065	THIES	ROTOSTREAM	1990		THIES mod. Rotostream jet/overflow dyeing machine, yoc 1990, high temperature, four ropes,nominal capacity 480 Kg. , EAS mod PM-1000 program controller.
8066	THIES	ROTOSTREAM	1995		THIES mod. Rotostream jet/overflow dyeing machine, yoc 1995, high temperature, three ropes,nominal capacity 360 Kg. , EAS mod PM-1000 program controller.
7578	THIES	ROTOTUMBLER	1996		1 x THIES high temperature dyeing and tumbling machine type ROTOTUMBLER year 1996, Jet 10 29566 ltr contents with 2 chambers each chamber 180 kg, total 360 kg, with Thies control
7648	THIES	TRD	1996/2003		1 x THIES TRD HIGH TEPERATURE DYEING MACHINE 2 tube as cigar, year 1996, in 2003 completely revised by THIES, JET13, 2 tube each tube 150 kg, total 300 KG, 140°C, with each tube 120/150 kg contents total 240/300 kg
7424	THIES		1988		1 HAT bobin dyeing machine, Thies, 1 kg, yoc 1988
7489	THIES		1999		1 x THIES HIGH TEMPERATURE BEAM DYEING MACHINE year 1999, 300 ltr, with capacity 50 kg, BARCO SEDO 2000 CONTROL.
7640	THIES		1999		1 x THIES high temperature dyeing machine, YOC 1999, 300 l, with capacity 50 kg, barco sedo 2000 control
7775	TONG GENG		1997		9 x TONG GENG yarn dyeing machines, 2 x 500 kg, 2 x 400 kg, 1 x 300 kg, 1 x 200 kg, 1 x 100 kg, 1 x 50 kg, 1 x 15 kg, 1 x tubes press
7866	TORRES	P-131	1986	2200 mm	1 x TORRES MAQUINARIA TEXTIL raising machine, mod. P-131, YOC 1986, roll width 2200 mm., one drum of 36 raising cylinders, pile and counterpile. Dust fiber suction device.
7865	TORRES	PP.128	1998	2200 mm	1 x TORRES MAQUINARIA TEXTIL raising machine, mod. PP.128, YOC 1998, roll width 2200 mm, one drum with 32 counterpile raising cylinders. Entry with stretcher grooved cylinders, oscillating guider, exit by folder and batcher for A-frames.
7864	TORRES		1996	2400 mm	1 x TORRES MAQUINARIA TEXTIL raising range, YOC 1996, composed by two raising machines, roll width 2400 mm, ready to work at counterpile, exit by folder.
8068	TUBE-TEX	C 2500	2006	2400 mm	1 x Tube-tex Knit Calender Type: C 2500 Width: 2400mm YOC: 2006 EL: 380/3/50 Open width compactor with tension rack, scroll rolls, seam detector, centering device with driven slat roller, metal detector and dual slot steam box, air uncurler, AC i
7922	VAL HENDRIKSEN	SUPER	1998	3000 mm	Jigger, Vald Henriksen, 3000 mm, type Super 1200/3000, YOC 1998
7798	VALD HENRIKSEN	AT 1400/2200	2004	2000 mm	1 x VALD HENRIKSEN piece dyeing machine, YOC 2004, type AT 1400/2200, width 2000 mm, atmospheric jigger controlled by Sedomatic 5000 programme, content 1500 meters
7921	VALD HENRIKSEN	VACU	1997	3200 mm	Jigger, Vald Henriksen, 3200 mm, type Vacu 1200/3200, YOC 1997
7400	VOLLENWEIDER	TSF-1T	1995	2200 mm	1 x xVollenweider shearing machine, type TSF-1T, YOC 1995, 2200 mm
7401	VOLLENWEIDER	TSF-IT	1998	2200 mm	1 x Vollenweider shearing machine, type TSF-IT, YOC 1998, 2200 mm, with metaldetector, filtration system, 3 x 400 V
7790	VOLLENWEIDER	PAA-2 PSN	1996	2500 mm	2 x VOLLENWEIDER shearing machines for velvet, type PAA-2 PSN, 2500 mm, YOC 1996, with metal detector
7269	WET-TEX	5303/5	1998		1 x Wide washing line, Wet-Tex, type 5303/5, yoc 1998
7981	WUMAG	2000 W OB	1992	1800 mm	DRUM DRYER, WUMAG, 1992, type 2000 W OB, fabric width (mm) 1800, cylinder width (mm) 2000, Ø cylinder (mm) 800
7988	WUMAG	DRUM DRYER	2000	1800 mm	DRUM DRYER, WUMAG,YOC 2000, type 2 x 10 Zyl, fabric width (mm) 1800, cylinder width (mm) 2000, Ø cylinder (mm) 800,
7354	ZIMMER	RZ	1970	1900	1 Zimmer rotary screen printing macine 10 colors; w/w 1900 mm ; YOC 1970
8019	ZIMMER	RSDM 171	1990	1600 mm	1 x ZIMMER ROTARY STENCIL PRINTING, type RSDM 171, yoc 1990,1600 mm, screens and blades washing machine, 12 screens
7920	ZIMMER	RSDM17	1990	1600 mm	Rotary printing machine, Zimmer, type RSDM171, 1600 mm, 12 colors, steam heated, YOC 1990
7434	ZIMMER	RSDM 162/10	1988	1620 mm	1x ZIMMER Rotary screen printing machine, type RSDM 162/10, YOC 1988, ww 1620 mm, 10 colours, right side repeat, automatic dosage, lattice expander
7266	ZIMMER	RSDM 165/12	1990	1650 mm	1 x Rotationsprinting line, Zimmer, type RSDM 165/12, 1650 mm, YOC 1990, for woven and knitted fabrics,printing repeat from 64 cm up to 120.,6 cm, is possible
7432	ZIMMER	GUSS	1987	1850 mm	1x ZIMMER rotary screen printing machine, type GUSS, YOC 1987, ww 1850 mm, 12 colours, ZIMMER drying chamber
8022	ZIMMER	LASER ENGRAVIN	1996	3200 mm	1 x ZIMMER ROTARY SCREENS PRODUCTION COMPLEX, yoc 1996, with Laser unit, eloctrolytic bath, varnishing machine, screen stripper
8023	ZONCO EOLO	TUMBLER	1998	1800 mm	1 x ZONCO EOLO TUMBLER,type ADD/A-800/3 yoc 1998, 2 ropes, ROPE OPENING APRICORDA, type APR-AB, yoc 2006, 1800 mm
7557			1980	2000 mm	1 x stenter Brückner YOC 1980, ww 2000 mm, 6 bays, gas heated,vertical pin chain, Küster padder type 222

Exima GmbH Friedrichstr 14-16 Krefeld GERMANY

Phone : +49 2151 9798830 Fax : +49 2151 9798835 e-mail : info@exima.org

This site was last updated 11/29/09